- 1400 W continuous program power capacity
- 100 mm (4 in) copper voice coil
- 30 - 1000 Hz response
- 95.5 dB sensitivity
- Double silicone spider w/optimized compliance
- Nominal Diameter 460 (18) mm (in)
- Nominal Impedance (1) 8 Ohm
- Minimum Impedence 6.3 Ohm
- Nominal Power Handling (2) 700 W
- Continuous Power Handling (3) 1400 W
- Sensitivity (1W/1m) (4) 95.5 dB
- Frequency Range 30 - 1000 Hz
- Voice Coil Diameter 100 (4) mm (in)
- Winding Material Copper
- Former Material Glass Fibre
- Winding Depth 21 (0.83) mm (in)
- Magnetic Gap Depth 10.5 (0.4) mm (in)
- Flux Density 1.05 T
- Thiele & Small Parameters
- Fs 30 Hz
- Re 5.3 Ohm
- Qes 0.41
- Qms 4.6
- Qts 0.39
- Vas 245 (8.6) dm3 (ft3)
- Sd 1210 (187.6) cm2 (in2)
- Eta Zero 1.6 %
- Xmax +/- 8 mm
- Xvar +/- 8 mm
- Mms 202 g
- Bl 22.5 Txm
- Le 2.1 mH
- Mounting & Shipping Info
- Overall Diameter 460 mm (18 in)
- Bolt Circle Diameter 440 mm (17.3 in)
- Baffle Cutout Diameter 422 mm (16.6 in)
- Depth 197 mm (7.75 in)
- Flange & Gasket Thickness 16 mm (5/8 in)
- Net Weight 10.5 kg (23.1 lb)
- Shipping Weight 11.9 kg (26.2 lb)
- Shipping Box 500x500x250 mm
- (19.7x19.7x9.8 in)
(1) For different impedances, please ask.
(2) 2 hours test made w/continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
(3) Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
(4) Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
|
Shopping Cart
