 |
6 inch In-Ceiling Speaker bracket For Uses in a New Construction Projects Serves as Place Holder Metal Wings Easy to Mount at Any Framing Situation With Virtually No Rise In Drywall Depth.
|
|
 |
8 inch In-Ceiling Speaker bracket For Uses in a New Construction Projects Serves as Place Holder Metal Wings Easy to Mount at Any Framing Situation With Virtually No Rise In Drywall Depth.
|
|
 |
200 Watts X 2 micro amplifier with harness and speaker mounts with all necessary connectors and wires. Includes:. Pair of silver plastic bullet style 2.25" speakers.
|
|
 |
Set Up Height From 3.9 To 6.0 Feet. Black Anodized Aluminum Stand w/Metal Lock. Larger Diameter Tubing And Metal Reinforced Clamps Securely Support More Weight Than Other Stands.
|
|
 |
Adjustable Plate To Secure All Size Speakers. Holds Speakers That Are Equipped with Standard 35mm (1.375") Ploe Mounts. Made of Heavy Duty Welded Steel.
|
|
 |
Control Room Volume. 6-Position, Light-Touch Knob. Four-Pair Speaker Selector. Attractive Standard And Decora- Style. Includes Mounting Ring And Wire Nuts for Installation.
|
|
 |
Holds Speakers That Are Equipped With Standard 35mm (1.375") Pole Mounts. Made Of Heavy Duty Welded Steel. Mount to wall with the included lag screws and toggle bolts.
|
|
 |
djusts to 6 1/2 ft. maximum height. 35mm diameter tube with 132 lbs. load capacity. Safety pin for maximum strength and security. Black anodized finish.
|
|
 |
Adjusts to 58" maximum height. Designed for use with subwoofer cabinet with top mount hole. 35mm diameter tubing with 100 lbs. load capacity. Safety pin for maximum strength and security.
|
|
 |
Adjusts to 7 1/2" ft maximum height with steel crank-up mechanism. Smooth, ratchet cranking mechanism with safety lock and pin.
|
|
 |
Application: Use to Get Better Sound From Speakers.. Installed In Doors & Rear Decks.. Kit Contains: Two 10'' x 10'' Mats.
|
|
 |
Application: Use On Rear Decks, Doors, Floors & Trunk Floors to Get More Bass, More Music, Lower Road Noise & Get Better Sound.. Contains: One 18'' x 32'' Mat.
|
|
 |
Perfect for use to extend speaker coverage by elevating them to ear level. 2 speaker stands fully adjustable. 2 sets of 14 Ga speaker cables w/phono style connectors. Quality fabric carry case.
|
|
 |
2 Heavy duty speaker stands fully adjustable. 2 sets of 12 Ga speaker cables w/speakon connectors. Quality fabric carry case.
|
|
 |
Weight: 7.5 lbs. Loading Capacity: 100 lbs. Tubing Diameter: 1.5". Perfect For Use To Extended Speaker CoverageArea By Elevating Them To Ear Level. Black Anodized Stand.
|
|
 |
Up to 4 Separate Speaker Pairs to Your Stereo System. Accepts Speaker Wires up to 14-Gauge. Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms.
|
|
 |
Up to 6 Separate Speaker Pairs to Your Stereo System. Accepts Speaker Wires up to 14-Gauge. Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms.
|
|
 |
1" Length.
|
|
 |
1.0-inch diaphragm, 1.0-inch exit throat. 40 watt continuous program power handling. Frequency range: 1800hz - 20khz. 1-slot, optimized geometry phase plug.
|
|
 |
4.5-inch inside/outside copper voice coil. 3000 W continuous program power handling. 98.5 dB sensitivity. 30 Hz - 1 kHz frequency range.
|
|
 |
The nd350 is a very compact size compression driver for professional applications. Compact 2-way systems, multiple-way systems, compact arrays.
|
|
 |
Horn throat diameter mm: 50.8(2"). Mounting Type: Bolt on. Nominal impedance Ohm: 8. Frquency Response Hz: 500-20.000. Minimum cut off Frequency Hz: 800.
|
|
 |
Selenium's D220Ti-OMF-16 is a high quality compression driver offering excellent efficiency and low distortion.
|
|
 |
Replacement diaphragm for Selenium ST300 and ST320 super tweeters.
|
|
 |
Replacement diaphragm for D3300TI-DPD, D3305TI-DPD, and D3500Ti-Nd horn drivers.
|
|
Shopping Cart