The SWI-JACK allows you to retain the use of steering wheel or rear seat radio controls when replacing the factory head unit.

Use this cable with a Pioneer stereo that has the Aux Audio input feature and connect to an iPod. Plug this cable in behind the stereo and refer to the instruction manual on selecting the audio inpu.

Use this cable with a FULL SPEED Ready Alpine stereo. Plug this cable in behind the stereo and refer to the instruction manual for Source selection.

This listing is for a brand new & factory sealed PAC AAIKENW Auxiliary Input Cable Details. Cable for use with select interfaces to make auxiliary input;Alpine AI-NET to RCA cable through the vacant.

This listing is for a brand new & factory sealed PAC AAIPIOP Pioneer P Bus To RCA Stereo Cable. There is a 1 year gooddeals18 warranty on this item Details.

XM Tuner Harness for use with the iPAC-GM3 interface iPAC-GM3 interface sold separately. The iPAC-GM3 interface is used specifically for the 2006-2007 GM LAN 29-bit Databus vehicles.

AAI-GM24 is designed for vehicles with or without factory slave units (CD changer, XM Receiver, or DVD (RSE) slaves, but not all 3 at the same time).

Use this cable with a JVC stereo that has the Aux Audio input feature and connect to an iPod. Plug this cable in behind the stereo and refer to the instruction manual on selecting the audio input.

Use this cable with a Pioneer stereo that has the Aux Audio input feature and connect to an iPod. Plug this cable in behind the stereo and refer to the instruction manual on selecting the audio inpu.

Use this cable with a stereo that has the Aux Audio input feature and connect to an iPod. Plug this cable in behind the stereo using the RCA plugs or the 3.5mm phone plug for OEM stereos with an Aux.

For Alpine Ai-Net-bus stereos with Aux Audio input feature. Plug & Play installation. Clean digital-quality sound. Keeps your iPod charged. note: No control or radio display features.

The Trunk-LOC is the same as the SNI-35 below but with a low voltage trigger built into it. The low voltage circuit senses voltages as low as 0.8 volts and gives you a 12 volt output with a one seco.

Use this cable with an "Ai-Net" bus Alpine stereo that has the Aux Audio input feature and connect to an iPod.

WITHOUT XM Tuner Harness for use with the iPAC-GM3 interface iPAC-GM3 interface sold separately. The iPAC-GM3 interface is used specifically for the 2006-2007 GM LAN 29-bit Databus vehicles.