5 Variable Frequency Ranges - Band 1 (40-90Hz), Band 2 (125-250Hz), Band 3 (300-750Hz), Band 4 (1-4kHz), Band 5 (6-20kHz). Cut/Boost -12dB. Input Sensitivity - 950mV-9.6V. Output Voltage - 7.0Vrms.

9-Band Equalizer with Defeat Switch. Variable 40 - 60 Hz Sub-Bass Equalizer Band. Front and Rear Outputs with Fader Control. Defeatable High-Pass Crossover.

The KX3 is 3-way, the KX2 is 2-way, and both have a low-profile chasis for mount-anywhere flexibility.

Brand New Kicker ZX100.2 100W RMS 2/1 Channel ZX Series Amp ZX1002. 2-Channel ZX-Series Power Amplifier. Low Impedance Operation.

Number of Channels 2. RMS Power (4 ohms) 70 watts x 2 chan. RMS Power (2 ohms) 100 watts x 2 chan. RMS Power (1 ohm) Not Stable. Bridged RMS Power 200 watts. Peak Power Output 400 watts approx.

Low Impedance Operation. SORT Protection Circuitry (Short circuit, Over-voltage, Reverse polarity, Thermal). MOSFET Power Supply. KickBass: 0-18 dB @ 45 Hz.

Number of Channels 2. RMS Power (4 ohms) 110 watts x 2 chan. RMS Power (2 ohms) 175 watts x 2 chan. RMS Power (1 ohm) Not Stable. Bridged RMS Power 350 watts x 1 chan.

Brand New Kicker ZX350.4 ZX Series 4 Ch. 350W RMS Bridgeable Amp ZX3504. Advanced chassis with extruded aluminum heatsink. MOSFET class A/B power supply. Top-mounted controls.

Advanced chassis with extruded aluminum heatsink. Efficient class D circuitry. Top-mounted controls. KickBass 0-18 dB variable bass boost at 40 Hz.

Kicker ZX5503 For those who believe more is better, six ZX-Series Multi-Channel Amplifiers take care of multiple power issues from a single unit.

Number of Channels 5. RMS Power (4 ohms) 70 watts x 4 chan. + 210 watts x 1 chan. RMS Power (2 ohms) 85 watts x 4 chan. + 420 watts x 1 chan. RMS Power (1 ohm) Not Stable.

Advanced chassis with extruded aluminum heatsink. Efficient class D circuitry. Top-mounted controls. KickBass 0-18 dB variable bass boost at 40 Hz.

Kicker KX3 Active 3-Way Electronic Crossover Two sets of inputs 3 pairs of outputs (lows/mids/highs or front/rear/sub) Level controls Front outputs: variable 40-300 Hz (18 dB per octave) or 700-8000.

Power Cable w/under-hood braid: 20' 8 AWG. Ground Cable: 3' 8 AWG. Turn-On Lead: 20' 16 AWG. Fuse Holder: HM. Svstem Fuse: 50A MAXI.

4 Channels Marine AmplifierMOSFET class A/B power supply60 watts RMS x 4 Channels at 4-Ohms / 90 watts RMS x 4 at 2-Ohms175 watts x 2 Channels at Bridged mode0-18dB Variable bass boost50-200Hz Varia.

Thirty bands of 12dB cut or boost at 1/3-octave spacing mean ultimate frequency control in stereo or mono.

Low Impedance Operation. SORT Protection Circuitry (Short circuit, Over-voltage, Reverse polarity, Thermal). MOSFET Power Supply. KickBass: 0-18 dB @ 45 Hz.

Amplifier Type: 1 Channel RMS Power: 150W x 1 @ 4 ohms THD at 4-Ohm RMS Power. Advanced chassis with extruded aluminum heatsink. MOSFET class A/B power supply. Top-mounted controls.

RMS Power: 750W x 1 @ 4 Ohms. RMS Power: 1,200W x 1 @ 2 Ohms. RMS Power: 1,500W x 1 @ 1 Ohms. Efficient Class D Design. THD at 4-Ohm RMS Power: 1 %. Speaker Level Inputs. Preamp Outputs.

RMS Power: 500W x 1 @ 4 ohms. RMS Power: 1,000W x 1 @ 2 ohms. THD at 4-Ohm RMS Power: 1 %. Efficient Class D Design. Speaker Level Inputs. Preamp Outputs. LP Built-In Crossovers.