 |
These horn flares are the perfect complement to Eminence compression drivers. Each is manufactured from the highest quality materials to obtain a fine balance of strength, durability.
|
|
 |
All Eminence horns are constructed of a high-density, heavy-duty, injection molded ABS. Horn type: Constant Directivity. Minimum frequency: 1 kHz. Nominal dispersion: 80° H x 60° V.
|
|
 |
All Eminence horns are constructed of a high-density, heavy-duty, injection molded ABS. The TI2000 was designed to support even the largest 4-Bolt horn driver without the need for extra support bra.
|
|
 |
All Eminence horns are constructed of a high-density, heavy-duty, injection molded ABS. Horn type: Constant Directivity. Minimum frequency: 1 kHz. Nominal dispersion: 90° H x 40° V.
|
|
 |
These horn flares are the perfect complement to Eminence compression drivers. Each is manufactured from the highest quality materials to obtain a fine balance of strength, durability.
|
|
 |
Material: ABS Resin. Nominal coverage angle (HxV)-6 dB 90 x 40 Degree. Cut off frequency: 1000 Hz. Throat diameter: 25.40 mm. Mounting type: copper screw insert 1 3/8" - 18 UNEF.
|
|
 |
ABS Resin Nominal Coverage Angle (HxV)-6 dB:90x40 Cut Off Frequency: 1000 Hz Throat Diameter: 26mm Mounting Type: Zinc Screw Insert 1 3/8- 18 UNEF Dimensions: 11.9 x 6.3 x 43.
|
|
 |
Nominal Coverage Angle (HxV)-6 dB:90¡ãx40¡ã. Cut Off Frequency: 1000 Hz. Throat Diameter: 26mm. Mounting Type: Zinc Screw Insert 1 3/8"- 18 UNEF.
|
|
 |
Material: ABS Resin. Nominal Coverage Angle (HxV)-6 dB:90¡ãx40¡ã. Cut Off Frequency: 1000 Hz. Throat Diameter: 26mm. Mounting Type: Zinc Screw Insert 1 3/8" - 18 UNEF.
|
|
 |
Material: ABS Resin. Nominal Coverage Angle (HxV) 6dB:90 x 40. Cut Off Frequency: 1000 Hz. Throat Diameter: 26mm. Mounting Flange Diameter: 100mm. Mounting Hole Diameter: 6mm.
|
|
 |
Material: ABS Resin. Nominal Coverage Angle (HxV)-6 dB:90¡ãx40¡ã. Cut Off Frequency:1000 Hz. Throat Diameter: 30mm (1.2").
|
|
 |
Material: ABS Resin. Nominal Coverage Angle (HxV)-6 dB:90¡ãx40¡ã. Cut Off Frequency: 1000 Hz. Throat Diameter: 36mm. Mounting Flange Diameter: 114mm. Mounting Hole Diameter: 65mm.
|
|
 |
Six 3.5" Super Horn Tweeters. Black Carpeted Finish. Power Handling: 200 Watts Peak. Impedance: 8 Ohms. SPL: 97 dB @ 1W/1M. Frequency Response: 4kHz-27kHz.
|
|
 |
Midrange/Tweeter Compression Horn Driver. Titanium Diaphragm. 3" Flat Aluminum Voice Coil. 50 oz Magnet Structure. Frequency Response: 500Hz - 20kHz. Sensitivity: 107dB @ 1W/1M.
|
|
 |
125 Watts RMS/250 Watts Peak. 2" Titanium Super Tweeter. Plastic Frame. 60 oz Magnet Structure. High Temperature Voice Coil. Ferro Fluid Cooled. Sensitivity: 106dB.
|
|
 |
7.5" x 3.25" Piezo Tweeter. Excellent Transient Response, Low Distortion. Light Weight, Highly Reliable. Extreme High Frequency Response: 3.5-30kHz. 75 Watts RMS/150 Watts Peak. 4-8 Ohms Impedance.
|
|
 |
1-inch/1.4 inch Throat Adaptor. 90° x 75° Constant Directivity Coverage. Loading down to 800 Hz. State of the art sound qualityGENERAL SPECIFICATIONS.
|
|
 |
Side-fill & p.A. Applications.. reinforced fiberglass horn.. 50 mm (2") throat.. 40(h) x 20(v) nominal coverage.. metal bracket included (hs50).. nominal coverage.
|
|
 |
Large Retangular Horn for 2" Driver includes Bracket and Gasket. Throat mm (in) 50 (2). Material : Glass fiber. Dispersion: 60 degrees H x 30 degrees V. Throat diameter: mm (in) 50 (2).
|
|
 |
Selenium manufactures a variety of professional horns to complement their range of drivers. Each horn is crafted of high quality molded fiberglass, diecast aluminum.
|
|
 |
Selenium manufactures a variety of professional horns to compliment their range of drivers. Each horn is crafted of high quality molded fiberglass.
|
|
 |
Selenium manufactures a variety of professional horns to compliment their range of drivers. Each horn is crafted of high quality molded fiberglass.
|
|
Shopping Cart