- 80 watts RMS per channel power amplifier with complete custom installer feature set
- Bridgeable outputs for 250 watts RMS total output power
- Torrodial Power Supply
- 2 stereo low-level (RCA) inputs and one high-level (speaker) input, and one auxiliary low-level output
- Automatic source switching with adjustable delay timer (3-15 seconds)
- Two sets of speaker outputs selectable from the front panel
- Front mounted main volume and balance controls
- Rear mounted master level controls for setting max output levels
- Flexible Power-on: Switched, Signal Sensing, and 12v trigger
- 5 way speaker wire binding posts for bare wire or Banana plugs
- 80W per CH into 8 ohm loads with less than 0.2% THD+N
- 125W per CH into 4 ohm loads with less than 0.2% THD+N
- 250W Bridged Mono into 8 ohms with less than 0.2% THD+N
- Crosstalk: >65dB @ 1kHz, ref. to rated power into 8 ohms
- Frequency Response: (20Hz to 20kHz)+0.0dB, -0.5dB
- Signal to Noise ratio: -103dB ref. to rated power into 4 ohms
- AC Power Consumption: 700W (all channels driven)
- Net Weight: 24.3 lbs (11.0 kgs)
- Gross Weight: 32.2 lbs (14.6.0 kgs)
- UPC: 041087001788
|
Shopping Cart
