- The Mackie CFX12 mkII Mixer is designed to make mixing live performances simpler. The mkII upgrades include sleek gray cosmetics, ergonomic knobs, and impact-resistant rubber sides. This live sound mixer features Mackie-designed mic preamps, logarithmic-taper 60mm faders, 9-band phase-accurate graphic equalizer, 32-bit EMAC digital effects processor with 16 effects, 4-bus design, 2 pre/post aux sends, internal/external effects sends, and a host of great features for live sound, including 48V phantom power and 12V BNC lamp socket.
- Low-noise, high-headroom Mackie mic preamps
- 8 mono mic/line and 2 stereo line channels
- Built-in 32-bit EMAC digital effects processor with 16 effects
- External and internal EFX sends and EFX to Monitor control
- Onboard 9-band stereo graphic equalizer
- True 4-bus design ideal for live sound applications
- 2 Pre/Post aux sends and internal/external FX sends
- 3-band EQ with swept mid (100Hz to 8kHz) on mic/line
- 4-band EQ on stereo line channels
- Pan, Mute, PFL solo on each channel
- 100Hz low-cut filters on all mic/line channels
- Subwoofer output from built-in 18 dB/octave, 75Hz crossover
- Break switch mutes all channels
- Headphone output with level control
- Tape/CD inputs with level control assignable to Main Mix
- Logarithmic-taper 60mm faders
- 48V phantom power
- 12V BNC lamp socket
- Frequency Response
- Mic Input to any Output Trim at 0 dB
- 32Hz to 20kHz +0, -1 dB
- Distortion
- THD and SMPTE IMD; 20Hz to 20kHz
- Mic Input to Main Output < 0.05% at +4 dBu output
- Noise
- 20Hz to 20kHz BW (150 Ohms source impedance)
- Equivalent Input Noise (EIN): -127 dBu
- Residual Output Noise Main, Monitor, & Effects outputs Channel & Master levels off: -95 dBu
- Common Mode Rejection Ratio (CMRR)
- at 1kHz, Trim at 0 dB is 60 dB
- Crosstalk
- Adjacent Inputs or Input to Output -90 dB at 1kHz
- Fader Off -90 dB at 1kHz
- Mute Switch and Break Switch Mute -80 dB at 1kHz
- Input Level Trim Control Range
- +6 to -50dB
- Phantom Power +48V DC
- Equalization
- Low Cut 100Hz, -18dB/octave
- Mono Channel EQ:
- High ±15dB at 12kHz, Mid ±15 dB at 100Hz to 8kHz, Low ±15 dB at 80Hz
- Stereo Channel EQ: High ±15 dB at 12kHz, High Mid ±15 dB at 3kHz, Low Mid ±15 dB at 400Hz, Low ±15 dB at 80Hz
- Graphic EQ
- (9 bands): ±15 dB Q =1.414
- ISO octave centers at 63Hz, 125Hz, 250Hz, 500Hz, 1k, 2k, 4k, 8k, 16kHz
- Mixer Rated Output
- Main, Sub, Aux, & Efx: +4 dBu Maximum Rated Output: +20 dBu
- Maximum Input Levels
- Mic input Trim at +6 dB, +18 dBu
- Line Input Trim at -15 dB, +38 dBu
- Insert Return, Stereo Line Input, Tape Input, and Effects Return +20 dBu
- Maximum Voltage Gain
- Mic input to:
- Insert Output 50 dB
- Tape Output 66 dB
- Sub Output 66 dB
- Main Output 76 dB
- Aux Send 71 dB
- Line Input to:
- Insert Output 30 dB
- Tape Output 46 dB
- Sub Output 46 dB
- Main Output 56 dB
- Aux Send 51 dB
- Stereo Line Input to:
- Tape Output 40 dB
- Sub Output 40 dB
- Main Output 50 dB
- Aux Send 45 dB
- Tape Input to Main Output 30 dB
- Effects Return to Main Output 30 dB
- Input Impedance:
- Mic Input: 3 kilohms, balanced
- Line Input: 40 kilohms, balanced
- Insert Return, Stereo Line Input, Tape Input, and Effects Returns: 10 kilohms, unbalanced
- Output Impedance:
- Main Output, Insert Output, Tape Output, Sub Output, and Effects Sends: 150 Ohms
- Digital Effects
- Resolution 32-bit EMAC processing, 2-channel
- Number of Presets 16
- Parameters 2 controllable
- Channel Level Set LED (Sensitivity): 0 dBu (normal operating level)
- VU Meters: Main L/R 12 segments Clip, +10, +7, +4, +2, 0, -2, -4, -7, -10, -20,-30
- Weight: 17.8 lbs (8.1kg)
- UPC: 663961003444
|
|
Shopping Cart
