- The Mackie VLZ3 series are the latest in the popular VLZ line of small format mixing consoles. The VLZ3 is an improvement on the favored design with enhanced XDR2 microphone preamplifiers, an ultra quiet mix bus with improved headroom and a new look.
- The Mackie 1642-VLZ3 is modeled after the 1604-VLZ3 with added features for even further flexibility in live sound and production, as well as project studio recording. The 1642-VLZ3 features sixteen balanced/unbalanced switchable line inputs. Channels 1-6 are dedicated mono line inputs while channels 7, 8, EFX A & EFX B channels are stereo paired. Use the "EFX A" and "EFX B" channels as stereo line inputs or for returning external effects.
- Ten XDR2 (Extended Dynamic Range) mic preamps provide an incredible 130dB of dynamic range and reject noise and radio frequency interference. The EQ section features a sweepable mid range and low-cut filter. The 1642-VLZ3 features four sub group outputs that yield to 8 outputs as opposed to only four. This gives users the flexibility of routing channel signal through two locations simultaneously. An example of this would be routing signal to a multitrack recorder and monitors simultaneously for live performance recording.
- Improved XDR2 Microphone Preamplifiers
- Featuring four improved XDR2 microphone preamps provide an impressive 130dB of Dynamic range. The microphone preamps deliver a wider frequency range than the older XDR mic preamps.
- Improved Mix Bus
- All VLZ3 series mixers have more headroom and less distortion thanks to an improved mix bus. Negative Summing results in a quiet output signal with improved gain.
- Durable 60mm Fader Control
- 60mm tapered faders control Channel, "Sub Group 1-4" and "Main Mix" level.
- Rugged Construction
- All steel construction virtually eliminates noise caused by bad grounding. Because the chassis is steel, connections are automatically grounded on contact.
- Flexible Routing Options
- The 1642-VLZ3 provides Inserts on channels 1-8 and "Main Mix" out. There are 8 direct outputs on channels 1-8 and 4-direct Sub-Groups bused via 8 1/4" TRS Phone jacks. Use the buses for routing input channels to multitrack recorders, monitor feeds etc.
- Switchable Soloing
- There is switchable "Post Fader" and "Pre Fader" SOLO provided on every channel. The AFL/PFL SOLO switch is located in the master section.
|
Shopping Cart
