- New ultra-low noise VLZ3 design with highest possible headroom
- 6 studio-grade XDR2 Extended Dynamic Range mic preamps with: Ultra-wide 60dB gain range
- 130dB dynamic range
- +22dBu line input handling
- Extended low frequency response
- Distortion under 0.0007% (20Hz - 20kHz)
- Phantom power for studio condenser mics 12 high-headroom line inputs
- Advanced DC pulse transformer RF rejection
- 2 Aux sends, level, pan and PFL solo on each channel
- 2 stereo Aux returns + EFX to Monitor
- 3-Band Active EQ (80Hz, 2.5kHz, 12kHz)
- 18dB/oct. 75Hz Lo-Cut filter on Mic input channels
- ALT 3/4 stereo bus for added versatility
- Control Room/Phones source matrix
- Rack-mountable design using optional rack ears
- Sealed rotary controls to resist dust and grime
- New Multi-Voltage power supply for worldwide use
- Rugged steel chassis
- Main Mix Noise : (20 Hz-20 kHz bandwidth. 14" Main out, channels 1-6 T6im @ unity gain, channel EQs flat, all channels assigned to Main Mix, channels 1, 3 and 5 Pan left, 2, 4 and 6 Pan right.)
- Main Mix fader down, channel faders down: -101 dBu
- Main Mix @ unity, channel faders down: -91 dBu
- (95 dB Signal to Noise Ratio, ref +4 dBu)
- Main Mix fader @ unity, channel faders @ unity: -86 dBu
- Total Harmonic Distortion (THD) : (l kHz @ +14 dBu, 20 Hz-20 kHz bandwidth)
- Mic pre @ insert: 0.0007%
- Attenuation (Crosstalk) : (1 kHz relative to 0 dBu, 20 Hz-20 kHz bandwidth, Line in, 1/4" Main Out, Trim @ unity.)
- Main Mix fader down : -100dBu
- Channel Alt / Mute switch engaged : -90 dBu
- Channel fader down : -90 dBu
- Frequency Response : (Mic input to any output.)
- 20 Hz to 60 kHz : +0 dB/-1 dB
- 20 Hz to 100 kHz: +0 dB/-3 dB
- Equivalent Input Noise (EIN) : (Mic in to Insert Send out, max gain.)
- 150 ohm termination : -129.5 dBu, 20 HZ kHz
- Common Mode Rejection Ratio (CMRR) : (Mic in to Insert Send out, max gain.)
- 1kHz : better than -70 dB
- Maximum Levels
- Micin : +22 dBu - Tape in : +16 dBu - All other inputs : +22 dBu - Main Mix XLR out : +28 dBu - All other outputs : +22 dBu
- Impedances
- Mic in : 2.5 kilohms - Channel Insert return : 2.5 kilohms - All other inputs : 10 kilohms or greater - Tape out : 1.1 kilohms - All other inputs : 120 ohms
- EQ High Shelving : B @12kH - Mid Peaking : B @ 2.5 kHz - Low Shelving : B @ 80Hz
- Power Consumption
- 120 VAC, 50 / 60 Hz, 25 watts
- Fuse Rating
- 100-120V: 500 mA slo blo, 5 x 20 mm - 220-240V: 250 mA slo blo, 5 x 20 mm
- Weight
- 9.5 lb (4.5 kg)
- Dimensions (H x W x D)
- 12.9" x 14.0" x 3.2" (329 mm x 356 mm x81 mmx)
|
Shopping Cart
