- 192 DMX channels, 12 scanners of 16 DMX channels
- 30 banks of 8 programmable scenes
- 6 chases of 240 programmed scenes from 30 banks
- 8 faders for manual control
- Chasing speed & Fade Time of Auto programs(scenes & chases) under control
- Fade Time control over all DMX channel
- Blackout master
- Manual override
- Built-in microphone for Music triggering
- MIDI control over banks, chases & Blackout
- Power failure memory
A knowledge of MIDI & DMX is required to fully utilize this unit. This unit allows you to program 12 scanners of 16 DMX channels, 30 banks of 8 programmable scenes, 6 chases of 240 programmed scenes using 8 faders & other function buttons.
Up to 8 scenes can be programmed into a bank, & the amount of 240 programmed scenes can be stored into a chase & the scenes can be triggered by Music, Auto, Tap Sync, MIDI & Manual.
Display Information
The Segment Display consists of 4 digits. The first digit shows the active chase number(1-6), the second digit shows the active scene number(1-8), & the third & forth digits show the active bank number(01-30).
During Auto mode, a highlight in the lower right corner of the Segment Display next to "Auto trigger" indicates its selection.
During Music mode, a highlight in the upper right corner of the Segment Display next to " Music trigger" indicates its selection.
During Blackout mode, a fast blinking light indicates its selection in the upper left corner of the Segment Display next to" Blackout".
During Program mode, a fast blinking light indicates its selection in the lower left corner of the Segment Display next to" PROG.".
- Power Input . DC 9 12V, 300 mA mm.
- DMX Output 3 pin female XLR
- MIDI Signal 5 pin standard interface
- Audio Input By built-in microphone
- Dimensions 482x132x73mm
- Weight(appro.) 2.5 kg
- UPC: 855666000402
|
Shopping Cart
