- The E-143 (Asteroid) creates an array of 78 multi-colored beams that crisscross sound actively via its internal microphone. Unlike many versions out in the market, the E-143 has an onboard sensetivity knob on the rear of the unit, allowing you to make proper Adjustments. This unit is powered by 3x 120V-100W (EL-100) Lamp. Dimensions: 10.5"D x 8W" x 8"H. Weight: 6 Lbs.
- Model: E 143
- Lamp: 3 x LC-100 120V 100W
- Weight: 5.5 lbs.
- Size: 10.5"(L) x 8"(H) x 8"(W)
- Fuse: 3 Amp
- Supply Voltage: 120V
- Working Position: Any Safe position
- Duty Cycle: None
- Colors: Multiple Colored Lenses
- Warranty: 90 Days
The E 143 is a powerful effect for clubs & dj's.
The E 143 creates a dramatic cluster of strobing,
multi-colored beams. This unit features an internal
microphone that allows the beams to be triggered
by sound. The E 143 is ready to be hung or set on
the ground in a safe position. When mounting this
unit to truss be sure to use a clamp. Plug the unit in
to a standard 110 wall outlet. After plugging the unit
in, the fixture will react to the beat of the music via
the sound active internal microphone. The unit has
a sensitivity knob on the rear of the unit that makes
more or less sensitive to sound. Turning the knob in
clockwise direction will make the unit more sensitive
to sound. The unit requires sound to activate the
movement.
Lamp Replacement: Disconnect the units main
power supply. Unscrew & remove the three thumb
screws located around the edge of the dome lens
assembly. Remove the dome grill to expose the
lamps. Remove & replace the bulbs. Reassemble
and reconnect the power supply. Be sure to follow all
the handling instruction that are included w/your
new lamp.
|
Shopping Cart
