Brilliant Electronics Store Help Desktop HACKER SAFE certified sites prevent over 99.9% of hacker crime.


You are here: Home  >  DJ Equipment  >  DJ Lighting  >  
Eliminator E110 30 Multi-Colored Beams
Eliminator electronics products

Item No: Eliminator - E110
Price: $95.95
Availability: 28 units in stock T
   
  • Mystique
    The E-110 is a great special effect for clubs & mobile DJs. It is a bright & colorful effect, powered by 2 x 120v 300w lamps (EI-64514). Because of its special designed reflectors, this effect is ideal for clubs, ballrooms, & high school gyms. Its unique design gives you extra wide coverage & the beams swirl around each other to the beat of the music. The knob located on the rear of the unit may adjust the internal microphones sesitivity. Proven in the industry, this effect is very popular & powerful. Dimensions: 16"H x 16"W x 16"D Weight: 14 lbs.

  • Lamp: 2 x LL-64514 120V 300W
  • Weight: 14 lbs.
  • Size: 16" x 16" x 16"W
  • Fuse: 10 Amp
  • Supply Voltage: 120V
  • Working Position: Any Safe position
  • Duty Cycle: 10 min. on,10 min. off
  • Colors: Multiple Colored Lenses
  • Warranty: 90 Days

    The E 110 is a powerful effect for clubs & dj's. The E 110 creates a dramatic cluster of 30 multi-colored beams. This unit features an internal microphone that allows the beams to be triggered by sound. The E 110's beams bounce up & down to the beat of the music. The E 110 is ready to be hung or set on the ground in a safe position. When mounting this unit to truss be sure to use a clamp. Plug the unit in to a standard 110 wall outlet. After plugging the unit in, the fixture will react to the beat of the music via the sound active internal microphone. The unit has a sensitivity knob on the rear of the unit that makes more or less sensitive to sound. Turing the knob in clockwise direction will make the unit more sensitive
    to sound. The unit requires sound to activate the movement.
    Lamp Replacement: Disconnect the units main power supply. Unscrew & remove the thumb screws on the front of the fixture. Remove & replace the bulbs. Reassemble & reconnect the power supply.
  • Be sure to follow all the handling instruction that are included w/your new lamp.
  • UPC:

Be the first customer to Review this Item!
Rate this product
5 starsExcellent
4 starsAbove Average
3 starsAverage
2 starsBelow Average
1 starBad
Review Title (max 40 chars)

Your Review (300 words max)
 Information below are optional
Your nickname
Where are you from? (your city or state)
Email Address?
our address