Brilliant Electronics Store Help Desktop HACKER SAFE certified sites prevent over 99.9% of hacker crime.


You are here: Home  >  Car Audio & Video  >  Car Equalizers  >  
Kicker KQ30 30-Band Pre-Amp/Equalizer
Kicker electronics products

Item No: Kicker - KQ30
Price: $290.00
Availability: 4 units in stock T
   
  • Thirty bands of 12dB cut or boost at 1/3-octave spacing mean ultimate frequency control in stereo or mono. A scorching 9-volt output lets you pour on the signal to your amps.Adjustable input and output controls for each channel add more control, and fast-acting clip indicators keep things from getting too crazy.
  • 30 Bands at 1/3 Octave Spacing As stated above in the Introduction, a 1/3 octave equalizer gives you all the
  • control necessary to adjust your sound system for a smooth response or to dial it in to your ears liking. The KQ30
  • gives you the ISO standard 30 bands at 1/3 octave spacing from 20 Hz to 20 KHz.
  • 12 dB Boost or Cut At each of the 30 1/3 octave spaced controls you can boost or cut the intensity of the signal
  • by up to 12 decibels (dB). Plenty of control and then some since most systems typically need no more than 6
  • dB of boost or cut to get things dialed in.
  • High Voltage Pre-amp There are quite a variety of head units on the market today, not to mention if you are
  • using a line driver or pre-amplifier in your system. The KQ30 will work with an audio input signal as little as 500 mv
  • up to a mind numbing 9 Volts! Plenty of range to work with anything you can throw at it. At the same time it can
  • deliver a full 9 volts of audio output to send down the line to your crossovers or amplifiers.
  • Separate Left and Right Input Controls For the best possible sound quality and least amount of noise you
  • want to get your KQ30 matched up to your head unit, the separate left and right input sensitivity controls let you
  • do just that. Being separate allows you to tweak input channel balancing as well.
  • Separate Left and Right Output Controls To minimize noise in your system you want to pass as much
  • audio signal voltage as you can down the line to the next component. Too much and you will cause undesired distortion...
  • not enough and your system will sound thin and not play to it's full potential. The left and right output
  • controls allow you to find just the right amount of signal to accomplish this and do any channel balancing tasks
  • required at this stage.
  • Separate Left and Right Input Clipping LED's Clipping the input of your pre-amp components is not a
  • good thing when you want clean sound. The LED indicators are a great tool to help you in setting up the input gain
  • controls on your KQ30. These indicators will blink as you get within 3 dB of clipping the input section of your unit.
  • Separate Left and Right Output Clipping LED's Just as with the input, you do not want to clip the output
  • of your KQ30. The output LED indicators will blink as you get within 3 dB of driving the KQ30 into clipping to help
  • you with setting up your eq.
  • Mono / Stereo Selector The KQ30 is a stereo equalizer and will do its magic on both the left and right channels
  • at the same time. For those 'Livin' Loud' tweakers who want to have separate left and right controls, you can use
  • two units and equalize the channels independently. Just grab two units, flip the switches to Mono, and you are
  • ready to go!. In Mono mode the KQ30 will sum whatever is input to both the left and right channels into a mono
  • signal and then pass this signal to both the left and right outputs. See the diagrams further in this manual for
  • details.
  • EQ / Bypass Switch Whether your tweaking your system by ear to get that sound you want or using a real time
  • analyzer for an ultra smooth response curve, you'll find times when you want to compare what you had...to what
  • you got. This is what the EQ /Bypass switch does. When in bypass mode it sends the input signal directly to the
  • output jacks without any equalization. So with a simple press of the switch you can compare life before the
  • KQ30...and after!
  • Operating voltage: 11 to 16 volts DC
  • Chassis Fuse: 2A mini-ATC
  • Audio Signal:
  • Minimum input voltage: 500 mV RMS
  • Maximum input voltage: 9 Volts RMS
  • Maximum output voltage: 9 Volts RMS
  • SNR (signal to noise), A Weighted: Re: 9 Volts / 120 dB
  • Channel Separation: Re: 9 Volts / 80 dB
  • Equalization: 30 bands
  • Width: 10.25 in / 26.04 cm
  • Depth: 7.50 in / 19.05 cm
  • Height: 1.125 in / 2.86 cm
  • UPC: 713034013846

Be the first customer to Review this Item!
Rate this product
5 starsExcellent
4 starsAbove Average
3 starsAverage
2 starsBelow Average
1 starBad
Review Title (max 40 chars)

Your Review (300 words max)
 Information below are optional
Your nickname
Where are you from? (your city or state)
Email Address?
our address