 |
2 Way Electronic Crossover. Variable Crossover Frequencies. Subwoofer: 35Hz-400Hz. High Pass : 50Hz-1.5Khz. Variable Bass Boost, 0 - +18Db @ 45Hz. Slope Rate: 12 Db/Octave.
|
|
 |
2/3 Way Electronic Crossover. Inputs: Front, Rear And Subwoofer. Outputs: Front, Rear And Subwoofer. Frequency Multiplier: X1 Or X20. Selectable Crossover Frequencies.
|
|
 |
Since the earliest days of Clarion has continued to open up new opportunities in entertainment to exceed customer expectations through forward-thinking design and the latest technology.
|
|
 |
BRAND NEW Boss BX35 3-Way Electronic Crossover. Front, rear, and subwoofer inputs. Front, rear, and subwoofer outputs. Variable 0 - 18 dB bass boost.
|
|
 |
18 dB/oct. Slope. Front/Rear Subwoofer Level Control. Built-in Bass EQ. Remote Subwoofer Level Control (included). Cross Frequency Multiplier. 2/4/6 Channel Inputs / Separate F/R Crossover.
|
|
 |
Eminence PX25K0 2-way Crossover 5khz.
|
|
 |
type 2-way. cabinet ready. no. crossover frequency 800hz. slope 12db/octave lp. impedance 8 ohms. power handling 400w. hf level. mounting cut-out.
|
|
 |
Eminence pxb board-only crossovers are a lower cost alternative to the "cabinet ready" models and are targeted specifically for custom cabinet projects as they do not include the terminal c.
|
|
 |
Type Low-Pass. Cabinet Ready No. Crossover Frequency 250 Hz. Slope 12dB/octave. Impedance 8 ohms. Power Handling 600W.
|
|
 |
Surface/Angle/Swivel mountable. In-line Crossover Network. 3 Mounting Kits. Tweeter Design Dome. Impedance (per voice coil) 4 ohms. Flush Mount Yes. Surface Mount Yes. Angled Mount Yes.
|
|
 |
Type 2-way. Cabinet Ready No. Crossover Frequency 3.5kHz. Slope 12dB/octave LP. Impedance 8 ohms. Power Handling 400W. HF Level. Mounting Cut-out.
|
|
 |
Type: 2-way. Cabinet Ready: No. Crossover Frequency: 1.6kHz. Slope: 12dB/octave LP. Impedance: 8 ohms. Power Handling: 400W. HF Level . Mounting Cut-out.
|
|
 |
Type 2-way. Cabinet Ready: No. Crossover Frequency 500Hz. Slope 12dB/octave LP. Impedance 8 ohms. Power Handling 400W. HF Level. Mounting Cut-out.
|
|
 |
Cabinet Ready: No. Crossover Frequency: 500Hz/1.6kHz. Slope: 12dB/octave LP. Impedance: 8 ohms. Power Handling: 400W. HF Level. Mounting Cut-out.
|
|
 |
Type: 3-way. Cabinet Ready: No. Crossover Frequency 500Hz/3.5kHz. Slope 12dB/octave LP. Impedance 8 ohms. Power Handling 400W. HF Level. Mounting Cut-out.
|
|
 |
Type: High-Pass. Cabinet Ready: No. Crossover Frequency: 5kHz. Slope: 18dB/octave Butterworth. Impedance: 8ohms. Power Handling: 400Wrms.
|
|
 |
2/3-Way Active Crossover.
|
|
 |
two sets of inputs. 3 pairs of outputs (lows/mids/highs or front/rear/sub). level controls. front outputs: variable 40-300 Hz (18 dB per octave) or 700-8000 Hz (with 20X multiplier).
|
|
 |
Improve your car audio with an optidrive 2/3 way electronic crossover. Car accessory boasts a high pass frequency selector. Electronics device features a signal gain control.
|
|
 |
Front & Rear Channel. High Pass Frequency Selector. 32Hz to 800Hz. Frequency Multiplier X1 or X10. Signal Gain Control. +1208 Bass Boost. Phase Shift Switch. Stereo/ Mono Switch.
|
|
 |
Hi-Pass Crossover Adjustable Frequency From 80 To 2.5K Hz. Lo-pass Crossover Adjustable Frequency From 35 To 400 Hz. Variable Bass Boost Level From 0 To 12 dB.
|
|
 |
50Hz - 6.5k Hz Fader Control Levels. Subwoofer Level Controls. Master Level Controls. Peak LED. Input Level Adjustment. 3 Pre-Outs. Front Hi-Pass Full Range: Switchable-100Hz-150Hz-200Hz.
|
|
 |
Active 12dB Crossover. Strereo/Mono Selector on Low Pass. Phase Inversion Switch (0 or 180 Degree). Sub-woofer Input On/Off Switch. Variable Output Gain Control.
|
|
 |
3-Way Electronic Crossover. Hi-Pass Crossover: 32Hz-800Hz For Front & Rear Channel. X10 Frequency Multiplier For Front Channel. Low-Pass Crossover: 50Hz-160Hz For Subwoofer Channel.
|
|
 |
Hi-Pass Frequency Selector 40Hz-400Hz. Frequency Multiplier X1 or X2. Selectable Slope 12dB Per Octave. Parallel Input Switch. Low-Pass Frequency Selector 32Hz-250Hz. Variable Bass Boost: 0-+12dB.
|
|
Shopping Cart